Electronics Line 3208GLD Manual de usuario descargar pdf (Pagina 45)

APPENDIX A: TROUBLESHOOTING

The following is a guide to troubleshooting, using the Summit 3208GLD security system.

Problem Reason Action

Telephone line failure appears

when the telephone line is not

connected (control panel used as a

local alarm).

Event codes programmed at

values above “00”.

Program event codes as “00” and

power down the panel.

Keypad display not responsive. A Keypad at a different address

has been activated.

Wait for time out to activate, or

press “AWAY” key.

No display on keypad. Auxiliary power fuse blown. Replace fuse.

Constant low battery message on

display.

Faulty battery or battery fuse

blown.

Replace battery at least every five

years or replace the blown fuse.

No sound from the bell. Blown bell fuse or wrong

parameters.

Replace fuse or program the bell

parameters correctly.

Zone expander does not give any

zone indications.

Zone expander supervision is not

programmed.

Reprogram parameters.

A single output does not react

properly.

Programming error. Correct the programming for the

specific relay.

Wrong alarm or trouble indicator

from the zone.

Wrong zone loop type selected. Reprogram zone type parameters

for the correct loop type.

Failure to communicate with the

central station.

Wrong telephone number, wrong

event code, wrong protocol, or

wrong telephone line parameters.

Consult with the central station

owner/operator and program the

appropriate parameters.

Failure to communicate with the

central station.

Incorrect telephone line

communication.

Incoming line should be connected

to terminals 3 and 4. Outgoing

telephone line to terminals 1 and 2.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 51

Comentarios a estos manuales

Sin comentarios

Electronics Line 3208GLD Manual de usuario Pagina 45

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Electronics Line 3208GLD